Can be lowered to a height of 9.5 cm – no need for measures that limit mobility

The floorline® 9.5|80 helps spare patients at risk of injury from the use of measures that limit their mobility. The low resting position of just 9.5 cm off the ground protects restless sleepers against injuries − and supports carers in their work, because there is no need to put out roll-down mattresses in the evenings before patients go to sleep. Unlike roll-off mattresses that can make it difficult for patients to get out of bed safely, the floorline 9.5/80 lets residents choose for themselves the perfect, safe position for them to get in and out of bed any time they want.

The floorline® 9.5|80 can be raised to a comfortable 80 cm when carers perform their work, and integrated telescopic side rails provide safety for the patients in higher lying positions. Thanks to the special lifting column mechanisms in the head and lower leg section, the bed provides unobstructed clearance for lifters and grab rails to help patients out of bed.

Advantages at a glance

  • Comfortable, self-determined and safe: next to the floor sleeping position
  • Enormous height adjustment from 9.5 – 80 cm
  • Rolling instead of falling: safety without fixation also for agitated sleepers
  • Enormous stability in every bed height
  • 100 mm castors with single brakes and integrated wall protection rolls
  • Trendelenburg / Reverse Trendelenburg
  • Comfort-sitting position
  • Hand control with locking function
  • Different comfort lying surfaces

Basic equipment

  • SMPS with extra-low voltage system
  • Wooden slats with section reinforcement
  • Trendelenburg / Reverse Trendelenburg
  • Mattress compensation
  • Low entrance height
  • Individual locking function

Specifications

  • Total weight: ca. 165 kg
  • External dimension: 102 × 240 cm
    (option: bed can be shortened to 230 cm for transport)
  • Safe working load: 220 kg
  • Maximum person weight: 185 kg
  • Height adjustment: 9.5 – 80 cm
    (15.5 – 80 cm with long divided side rails)
  • Height of the lying surface: 9.5 cm
    (15.5 cm with long-divided side rails)
  • Side rail height: 39.5 cm with wooden slats, 35 cm with ripolux®
  • Lying surface dimension: 90 x 200 cm, integrated bed extension to 220 cm
  • Motors: water-resistant to IPX4, high-quality spiral cable with anti-kink cable management, SMPS with extra-low voltage system
  • Feature options:
    • End panel: Type 31 / 32
    • Side rails: without side rails / with continuous wooden side rails

Downloads

Colours
Beech, steamedSonoma oak, lightCherry HavannaMaple, darkWalnut, darkRoyal MapleBloomed Beech

Beech, steamed

R24034
 

Sonoma oak, light

R20128

Cherry Havanna

R42006

Maple, dark

R27017

Walnut, dark

 R30011

Royal Maple

R27001

Bloomed Beech

R24035

End panels
Type 32Type 31

Type 31

  • Curved colour panel, metal
  • Rounded metal bar
  • Continuous front panel, wood

Type 32

Lying surfaces
Wooden slats with section reinforcementAluminium lying surface with removable barsripolux® neo

Wooden slats with section reinforcement

  • Comfortable
  • Ergonomic
  • Easy to clean

Aluminium lying surface with removable bars

  • Extra light
  • Stable
  • Washable
  • With removable bars

ripolux® neo

The flexible lying surface system ripolux® neo fits the body’s pressure distribution perfectly. For a comfortable, ergonomic positioning in bed, in every sitting and lying position, For ripolux® neo a mattress compensation is needed. Additional informationen >>

Special length
Special length to 220 cm only with bed extension

Special length to 220 cm only with bed extension

Side rails
Without side railsContinuous side railsLong-divided side railsHead-section side rails

Without side rails

Continuous side rails

Our continuous side rails with safety interlock can be lifted or lowered very easily - so that restriction is kept to a minimum.

Long-divided side rails

Due to the long-divided side rails, it is possible to use side rails only at the head part. This offers optimal security by legal guidelines and is at the same time only minimally restrictive.

Head-section side rails

The telescopic head-section side rails provide the protection required by law without unnecessarily limiting patients’ freedom.

Bed lamps
Bed lamp model GBed lamp model EUnderbed lights model UF

Bed lamp model G

Bed lamp model E

Underbed lights model UF

Illuminant l: LED
35V/5W
Controllable via handset

Extras
Illumininated handset

Illumininated handset

Accessories
Lifting pole with triangle gripInfusions holder, angledInfusions holder, quadruple, straightInfusions holderBed extensionMattress extension for 220 cm lengthClip-on side railsSide rail bumpersTransfer matTEXIBLE Wisbi HOMEUniversal clamp with drainage bag holdernurse control panelHandsetUniversal clamp with urine bottle holderTransport system

Lifting pole with triangle grip

Infusions holder, angled

  • with 4 hooks for infusion bags

Infusions holder, quadruple, straight

  • Telescopic: height adjustable

Infusions holder

  • Double
  • Affixed to lifting pole

Bed extension

Mattress extension for 220 cm length

Clip-on side rails

  • Raises side rails by approx. 10 cm
  • Available for:
    • continuous side rails
    • long-divided side rails
    • short-divided side rails

Side rail bumpers

  • Available for long splitted, short slitted and continuous side rails

Transfer mat

TEXIBLE Wisbi HOME

Intelligente Betteinlage zur Bed-Exit- und Feuchtigkeits-Erkennung mehr >>

Universal clamp with drainage bag holder

nurse control panel

Handset

for bed lamp

Universal clamp with urine bottle holder

Transport system

Mattresses
Bock standard mattress RG 35Bock standard mattress with PU fitted sheet RG 35Bock standard mattress RG 40Nursing care mattress with PU cover RG 40riposan-mattress RG 55 (anti-decubitus mattress)

Bock standard mattress RG 35

  • Density 35 kg/m3
  • PU-foam mattress, 100 % polyester, 90 × 200 × 10 cm
  • 1-side zip, Single Jersey cover (light blue)

Bock standard mattress with PU fitted sheet RG 35

  • Density 35 kg/m3
  • PU-foam mattress, 100 % polyester, 90 × 200 × 10 cm
  • 1-side zip, PU fitted sheet

Bock standard mattress RG 40

  • Density 40 kg/m3
  • PU-foam mattress, 90 × 200 × 12 cm
  • Hinged
  • 2-sided zip, Cover made of elastic knitware (180 g/m², 58 % polyester, 42 % cotton)
  • Washable 95 ˚C, autoclavable 105 ˚C

Nursing care mattress with PU cover RG 40

  • Density 40 kg/m3
  • PU-foam mattress, 90 × 200 × 12 cm
  • Hinged
  • 2-sided zip, PU cover
  • Washable up to 95 ˚C, autoclavable up to 105 ˚C

riposan-mattress RG 55 (anti-decubitus mattress)

  • Density 55 kg/m3
  • PU-foam mattress, approx. 14 cm high
  • 2-sided zip, double cover, knitted fabric
  • Washable up to 95 °C
  • 5 - section anti-decubitus mattress
  • Suitable for allergic persons, dirt-resistent