Comfortable low bed with flexible height between 25 and 80 cm

The practico low 25/80 delivers all the comfort of the familiar practico models, from telescopic side rails and the integrated bed extension to the fully adjustable Trendelenburg / Reverse Trendelenburg function and comfort sitting positions.

As a low bed, the practico gives patients who are prone to falling greater freedom without needing to limit their mobility. The lying surface, which can be lowered until it is very close to the floor, minimises the risk of injury to patients if they fall out of bed, especially in conjunction with a roll-down mattress.

Advantages at a glance

  • Enormous height adjustment from 25 – 80 cm
  • Enormous stability in every bed height
  • Central braking with directional locking device
  • Lifter space: 15 cm
  • Trendelenburg / Reverse Trendelenburg
  • Comfort-sitting position
  • Hand control with locking function
  • Different comfort lying surfaces
  • Variable side rail solutions
  • Integrated bed extension

Basic equipment

  • Wooden slats with section reinforcement
  • Integrated wooden side rails
  • Trendelenburg / Reverse Trendelenburg
  • Mattress compensation
  • Low entrance height
  • Side panelling for the lying surface frame
  • Individual locking function

Specifications

  • Total weight: 147 kg
  • External dimension: 105 x 210 cm
  • Safe working load: 220 kg
  • Maximum person weight: 185 kg
  • Height adjustment: 25 – 80 cm
  • Lifter space: 15 cm
  • Side rail height: 39,5 cm with wooden slatted frame, 35 cm with ripolux® neo
  • Lying surface dimension: 90 x 200 cm
  • Motors: water-resistant to IPX4, high-quality spiral cable with anti-kink cable management, fuse in the mains plug and emergency drop.
  • Lying surface: 4-section
Colours
Beech, steamedSonoma oak, lightCherry HavannaMaple, darkWalnut, darkRoyal MapleWhiteBloomed Beech

Beech, steamed

R24034
 

Sonoma oak, light

R20128

Cherry Havanna

R42006

Maple, dark

R27017

Walnut, dark

 R30011

Royal Maple

R27001

White

W10140

Bloomed Beech

R24035

End panels
Type IType VType VII

Type I

  • Circumferential solid wood strips with decor filling
  • Practical bed cover slit

Type V

  • Curved colour panel, wood
  • Rectangular bars, wood
  • Grip frame, powder coated steel tube

Type VII

  • Planked colour panel, wood
  • Vaulted grip opening, wood
  • Tapered bars, wood
Lying surfaces
Wooden slats with section reinforcement

Wooden slats with section reinforcement

  • Comfortable
  • Ergonomic
  • Easy to clean
Special width
Special width 100 cmSpecial width 110 cmSpecial width 140 cm

Special width 100 cm

Special width 110 cm

Special width 140 cm

Special length
Special length 210 cmspecial length 220 cm

Special length 210 cm

special length 220 cm

Side rails
Continuous side railsWithout side railsLong-divided side railsShort-divided side railsHead-section side rails

Continuous side rails

Our continuous side rails with safety interlock can be lifted or lowered very easily - so that restriction is kept to a minimum.

Without side rails

Long-divided side rails

Due to the long-divided side rails, it is possible to use side rails only at the head part. This offers optimal security by legal guidelines and is at the same time only minimally restrictive.

Short-divided side rails

The short-divided side rails offer security from falling out of the bed, but are less restrictive towards the patient´s freedom of movement.

Head-section side rails

The telescopic head-section side rails provide the protection required by law without unnecessarily limiting patients’ freedom.

Bed lamps
Attachable bed lamp FUnderbed lights model UB with motion sensorUnderbed lights model UF

Attachable bed lamp F

Model F
Illuminant : LED
Swiveling head
35V/5W
Switchable via hand control

Underbed lights model UB with motion sensor

Illuminant l: LED
35V/5W

Underbed lights model UF

Illuminant l: LED
35V/5W
Controllable via handset

Extras
Bedclothes depositCovered castorsWall distance holderWall distance holder with castorWall protection castors

Bedclothes deposit

Covered castors

Wall distance holder

head end / lateral side

Wall distance holder with castor

head end / lateral side

Wall protection castors

horizontal / vertical

Accessories
Lifting pole with triangle gripInfusions holder, angledInfusions holder, quadruple, straightBed extension to 220 cmMattress extension for 220 cm lengthClip-on side railsGrab railUniversal clamp with drainage bag holderUniversal clamp with urine bottle holderSide rail bumpersRoll-down mattressTransfer matTransport systemInfusions holder

Lifting pole with triangle grip

Infusions holder, angled

  • with 4 hooks for infusion bags

Infusions holder, quadruple, straight

  • Telescopic: height adjustable

Bed extension to 220 cm

Mattress extension for 220 cm length

Clip-on side rails

  • Raises side rails by approx. 10 cm
  • Available for:
    • continuous side rails
    • long-divided side rails
    • short-divided side rails

Grab rail

Universal clamp with drainage bag holder

Universal clamp with urine bottle holder

Side rail bumpers

  • Available for long splitted, short slitted and continuous side rails

Roll-down mattress

For lie-low beds

Transfer mat

Transport system

Infusions holder

  • Double
  • Affixed to lifting pole
Mattresses
Bock standard mattress RG 35Bock standard mattress with PU fitted sheet RG 35Bock standard mattress RG 40Nursing care mattress with PU cover RG 40riposan-mattress RG 55  (anti-decubitus mattress)

Bock standard mattress RG 35

  • Density 35 kg/m3
  • PU-foam mattress, 100 % polyester, 90 × 200 × 10 cm
  • 1-side zip, Single Jersey cover (light blue)

Bock standard mattress with PU fitted sheet RG 35

  • Density 35 kg/m3
  • PU-foam mattress, 100 % polyester, 90 × 200 × 10 cm
  • 1-side zip, PU fitted sheet

Bock standard mattress RG 40

  • Density 40 kg/m3
  • PU-foam mattress, 90 × 200 × 12 cm
  • Hinged
  • 2-sided zip, Cover made of elastic knitware (180 g/m², 58 % polyester, 42 % cotton)
  • Washable 95 ˚C, autoclavable 105 ˚C

Nursing care mattress with PU cover RG 40

  • Density 40 kg/m3
  • PU-foam mattress, 90 × 200 × 12 cm
  • Hinged
  • 2-sided zip, PU cover
  • Washable up to 95 ˚C, autoclavable up to 105 ˚C

riposan-mattress RG 55 (anti-decubitus mattress)

  • Density 55 kg/m3
  • PU-foam mattress, approx. 14 cm high
  • 2-sided zip, double cover, knitted fabric
  • Washable up to 95 °C
  • 5 - section anti-decubitus mattress
  • Suitable for allergic persons, dirt-resistent